Bruker Radiation Probe
The Bruker Radiation Probe is a gamma dose-rate detector that mounts to the superstructure and has IP66 protection. This detector outputs data over RS422 and can be integrated directly to any ITor Platform Management system.
The Radiation Probe is based on semiconductor technology. The used technology combines high level of reliability with lowest possible life cycle costs. The Radiation Probe can be used in a wide range of applications including naval applications, vehicle applications and critical infrastructure protection. No preventive maintenance is required. No consumables are needed.
RAID-S2 IQplus Chemical Detector
RAID-S2 IQplus is a gas trace detector for Chemical Warfare Agents (CWAs) and Toxic Industrial Chemicals (TICs). RAID-S2 IQplus is designed for continuous operation in varying environmental conditions with minimal operator interface and maintenance. The instrument can be operated alone or in multiples to form detection networks. Smart algorithms and new dopants reduce interferents to an unrivalled minimum. The RAID-S2 IQplus uses proven IMS technology and automatic polarity switching to provide continuous Detection, Identification and Monitoring of chemicals.
RAID-S2 IQplus Features
- Extremely high interference rejection.
- Continuous 24/7 operation.
- Ruggedised to meet military standards.
- Heated gas inlet improves measuring performance.
- Ethernet and RS422 interface.
- Next Generation NC Monitoring software.
- Naval, vehicle and critical infrastructure applications
RAID-XP Combined Chemical and Radiation Detector
Hardened to military standards, reliable and robust; RAID-XP is able to detect, identify and continuously monitor Chemical Warfare Agents (CWA) & Toxic Industrial Chemicals (TIC) using a high end Ion Mobility Spectrometer.
Simultaneously semiconductor sensors and two photo diodes are used for the detection and quantification of gamma radiation, dose rate and accumulated dose. Data monitoring and interrogation is achieved through a clear, unambiguous dual display and easy to operate integral software menus. RS232 and GPS interface are enabled.
The RAID-XP is a robust and flexible instrument built with trusted Bruker technology that is capable of operating standalone or mounted in vehicles.
RAPIDplus Standoff Chemical Detector
The RAPIDplus is a highly reliable and robust second generation stand-off detector that can automatically Detect, Identify and Monitor all known Chemical Warfare Agents (CWA) and important Toxic Industrial Chemicals (TICs) at long distances. The one piece self contained systems provide real time detection and can be used on any platform or infrastructure, with an extended substance library.
The second generation of RAPIDplus passive detection systems can be deployed for 360° remote sensing of threats at distances up to 5000m. The detection limits of the remote sensor for CWAs and TICs are in the low ppm range and the new enhanced list of chemicals in the library is comprehensive. RAPIDplus systems are fully hardened according to MIL 810G and 461F standards.
For more information regarding Bruker products, please This email address is being protected from spambots. You need JavaScript enabled to view it.